Vehicle Detection

Home / Products / Vehicle Detection

Conventional Cut-in Loop Detectors

Conventional Surface Cut-in Loop Detectors

  • Bircher Reglomat ProLoop 1&2
  • Power input  12/24v AC/DC
  • Din-rail mount or 11 pin base plug
  • 1 or 2 Channel models
  • Relay outputs (COM, NC, NO)   max 240vAC 2amp
  • Plug-in terminals
  • Operating temp -20c to +60c
  • Dimensions 22.5w x 94h x 88d
  • IP 20 – 40

Conventional surface cut-in loop detectors require concrete

cutting & sealants.

Premade Loop Detectors

Pre-made Loop Detectors

Used for non sealed road surfaces or cast into concrete slabs during pour.

Loop detector kits include: Pre-made loop with 6m leader & module.

Pre-made Loop sizes

  • 500x1000mm / 500x1500mm / 1000x2000mm / 1000x3000mm
  • Custom sizes available on request
  • Loop construction 20mm conduits with corner access elbows & T’s
  • Bircher Reglomat ProLoop 1&2
  • Power input  12/24v AC/DC
  • Din-rail mount or 11 pin base plug
  • 1 or 2 Channel models
  • Relay outputs (COM, NC, NO)   max 240vAC 2amp
  • Plug-in terminals
  • Operating temp -20c to +60c
  • Dimensions 22.5w x 94h x 88d
  • IP 20 – 40

Vehicle Detection Wand

Vehicle Detection Wand

Used for activation of Gates, Doors Boom gates (Pulse output only)

Used for non sealed road surfaces or cast into concrete slabs during pour.

Or fitted walls or ceilings

  • Power input  12/24v AC/DC
  • PNP output or Relay output (COM, NC, NO)
  • 10m Wire lead
  • IP 67

Compact Progammable Vehicle Detection

Compact Programmable QSM18 Vehicle Detector

  • Banner S18M
  • Power input  12/24v DC
  • Outputs NPN or PNP
  • Optional quick connect programmer
  • Operating temp -40c to +70c
  • Dimensions 18mm diameter x 67mm long
  • 2m or 9m cable
  • IP 67
  • Optional PC connection interface & software
Compact ( Flat-pack) Programmable Q7MB Vehicle Detector

  • Banner Q7MB
  • Power input  12/24v DC
  • Outputs NPN or PNP
  • Optional quick connect programmer
  • Operating temp -40c to +70c
  • Dimensions 77L x 19w x 7.5d
  • 2m or 9m cable
  • IP 67
  • Optional PC connection interface & software

Photo Electric Beams - Reflective & Through-beams

Reflective Photo Electric Beams

  • Banner QS30 retrofit kit
  • Kit includes: Sensor, Reflector, Bracket & 9m cable
  • Power input  12/24v DC
  • Outputs relay (COM, NC, NO)
  • Range up to 8m
  • LED indicators: Green -Power on, Yellow – Sensing switching
  • Operating temp -20c to +70c
  • IP 67
Wired Photo Electric Through-beam

  • FAAC Commercial Beams (Transmitter & Receiver)
  • Power input  12/24v AC/DC
  • Side mount
  • Outputs relay (COM, NC, NO)
  • Range up to 30m max
  • Internal ball & gimbal alignment
  • LED indicators: Power on & beam alignment
  • Dimensions: 95h x 70w x 44d
  • Operating temp -20c to +55c
  • IP 54
Semi Wireless Photo Electric Through-beam

Use where LV power is not available on opposing side of roadway

  • FAAC Photo Beams (Transmitter & Receiver)
  • Transmitter power (Battery) approx. 3year range
  • Receiver power input  12/24v AC/DC
  • Side mount
  • Outputs relay (COM, NC, NO)
  • Range up to 20m max
  • Self aligning
  • LED indicators: Power on & beam alignment
  • Dimensions: 105h x 35w x 25d
  • Operating temp -20c to +55c
  • IP 54